CutListFlow/What Is a Cut List?

CutListFlow Workshop Guide · How-To Reference

What Is a Cut List? Step-by-Step Guide to Kerf, Grain & Guillotine Cuts

Quick Definition

A cut list is an exact schedule of every finished panel or linear piece required for a build—specifying length, width, quantity, wood grain direction, and edge banding—arranged onto stock sheets or boards while subtracting saw blade kerf and edge trim so every piece can be physically cut without waste surprises.

1. Cut List Anatomy2. 5-Step Calculation3. Kerf Math Formula4. Guillotine vs. Non-Guillotine5. Standard Sheet Sizes6. FAQ

1. What Fields Belong in a Shop-Ready Cut List?

Whether you are building kitchen cabinets from 4×8 ft plywood or framing a bench from 2×4 lumber, an actionable cut list captures six unambiguous attributes per component:

Part LabelLength (X)Width (Y)QtyGrain LockEdge Banding
Cabinet Side30-1/2" (775 mm)23-3/4" (603 mm)2Locked (No Rotate)Front edge [R]
Bottom Deck28-1/2" (724 mm)23-3/4" (603 mm)1Locked (No Rotate)Front edge [B]
Adjustable Shelf28-3/8" (721 mm)18-1/2" (470 mm)2Locked (No Rotate)Front edge [B]
Drawer Box Side21" (533 mm)6-1/2" (165 mm)4Free (90° OK)Top edge [T]

2. How to Calculate a Cut List in 5 Steps

Follow this deterministic workflow before making your first rip on the table saw or track saw:

  1. 1

    Subtract Joinery & Material Thickness from Overall Dimensions

    Never measure panels by exterior box width alone. For a standard butt-joint or rabbeted carcass of outer width W and board thickness T, horizontal top/bottom decks measure W − 2T.

    Inner Panel Span = Outer Width (W) − 2 × Board Thickness (T)
  2. 2

    Record True Usable Stock Dimensions & Edge Trim

    Factory plywood edges often arrive dinged or slightly out of square. Subtract a perimeter Edge Trim Margin (for example 1/4" or 5–10 mm) from your 4×8 ft (96"×48") or 1220×2440 mm sheet before placing parts.

    Usable Sheet = (Stock Length − 2 × Trim) × (Stock Width − 2 × Trim)
  3. 3

    Reserve Saw Blade Kerf Between Every Adjacent Cut

    Every pass of a circular saw turns a strip of wood equal to blade thickness (kerf) into sawdust. Always add (N − 1) × Kerf when checking whether N parts fit across a board width.

  4. 4

    Lock Grain Direction Before Rotating Parts

    Oak, walnut, birch, and directional melamine veneers look mismatched if adjacent doors or cabinet sides rotate 90°. Lock rotation on visible panels while leaving hidden cleats and drawer boxes rotatable for higher yield.

  5. 5

    Sequence Edge-to-Edge Guillotine Cuts & Log Reusable Offcuts

    Order full-sheet rip and crosscuts so the longest straight cuts happen first, maximizing large rectangular remnants instead of scattering unusable triangular scraps.

3. How Saw Blade Kerf Works (And Why Four 12" Strips Don't Fit on 48")

Kerf is the width of material removed by the saw blade teeth on each pass. Ignoring kerf is the #1 reason DIYers end up 1/4" to 3/8" short on the final piece cut from a sheet.

Minimum Required Span Formula
Total Span = Σ(Part Dimensions) + (Number of Pieces − 1) × Blade Kerf
Worked Example: Splitting a 48" (1220 mm) Sheet Into Four 12" Strips

At first glance, 4 × 12" = 48" seems to fit exactly across a standard 48" wide plywood sheet. However, separating 4 pieces requires 3 saw cuts. With a standard 1/8" (0.125" / 3.2 mm) table saw blade, those 3 cuts destroy 3 × 1/8" = 3/8" of wood—leaving the 4th strip at 11-5/8" instead of 12". Either account for kerf before buying sheets or reduce part width to 11-7/8" when four equal strips must come from one 48" width.

Saw / Blade TypeTypical Kerf (Inches)Typical Kerf (Metric)Best Use Case
10" Standard Table Saw Blade1/8" (0.125")3.2 mmGeneral cabinet plywood & 2×4 ripping
Thin-Kerf Circular / Table Saw3/32" (0.094")2.4 mmJobsite saws & reducing sheet waste
Track Saw (Plunge Saw)5/64" – 3/32"2.0 – 2.2 mmBreaking down full 4×8 & 1220×2440 sheets
Industrial Sliding Panel Saw5/32"4.0 mmHigh-volume melamine & scored panel cutting

4. Why Workshop Saws Must Use Guillotine Cutting

Many generic 2D packing apps use free-form MaxRects or pinwheel nesting designed for laser cutters and CNC routers. On a table saw, track saw, or panel saw, the blade travels in a straight line from one edge of the sheet all the way to the opposite edge—this constraint is called Guillotine Cutting.

Guillotine Layout (Saw-Ready)
CUT #1CUT #2CUT #3

Every cut traverses edge-to-edge on table & track saws

Non-Guillotine Pinwheel (Blocked)
!

Locked center T-junctions cannot be cut straight through

Guillotine Edge-to-Edge Cuts vs. Non-Guillotine Pinwheel Layout
AspectGuillotine (CutListFlow)Non-Guillotine (CNC Nesting)
Cut geometryEvery cut runs strictly edge-to-edge across the active panelPermits stopped interior L-turns and pinwheel clusters
Compatible shop toolsTable saw, track saw, sliding panel saw, circular sawCNC router, laser cutter, waterjet only
Cut sequence clarityProduces numbered Cut #1, #2, #3 rip & crosscut stepsRequires G-code toolpath; hard to execute manually
Offcut recoverabilityLeaves clean rectangular shop remnantsOften traps narrow irregular voids

5. Standard Plywood & Sheet Panel Sizes Reference

Sheet StandardImperial SizeMetric SizeCommon Applications
North American 4×8 ft48" × 96"1219 × 2438 mmStandard cabinet plywood, sheathing, shop fixtures
Metric Full Sheet48-1/16" × 96-1/16"1220 × 2440 mmGlobal cabinetry, birch plywood, melamine boards
Oversized MDF / Melamine49" × 97"1245 × 2464 mmAllows edge trimming to clean 48"×96" net size
Baltic Birch 5×5 ft60" × 60"1525 × 1525 mmDrawer boxes, shop jigs, CNC & furniture components
European Full Panel81-1/2" × 110-1/4"2070 × 2800 mmProduction frameless kitchens & commercial millwork

6. Cut List & Kerf FAQ

Should I enter nominal or actual dimensions in a cut list?
Always enter actual cut dimensions. For example, a nominal 2×4 stud measures 1-1/2" × 3-1/2" (38 × 89 mm), and 3/4" plywood often measures 23/32" (~18 mm) thick.
Why does CutListFlow calculate internally at 0.01 mm integer precision?
Mixed tape-measure fractions like 24-3/8" and metric values like 619 mm cause floating-point drift in standard JavaScript floats. Exact integer units (1 mm = 100 units, 1 inch = 2540 units) guarantee zero rounding errors.
How large should my Minimum Reusable Offcut setting be?
Most cabinet shops keep remnants down to 4"–6" (100–150 mm) on both axes for drawer parts, cleats, and stretchers, and discard narrower strips.
Which CutListFlow calculator should I start with?
Use the Plywood Cut Calculator for 4×8 & 1220×2440 sheet goods, the Cabinet Cut List Calculator to split W×H×D boxes automatically, or the 1D Linear Calculator for lumber and extrusion.

Ready to Optimize Your Own Cut List?

Open any calculator below—unlimited parts, native 24-3/8" fractions & mm, zero sign-up required.