CutListFlow Workshop Guide · How-To Reference
What Is a Cut List? Step-by-Step Guide to Kerf, Grain & Guillotine Cuts
A cut list is an exact schedule of every finished panel or linear piece required for a build—specifying length, width, quantity, wood grain direction, and edge banding—arranged onto stock sheets or boards while subtracting saw blade kerf and edge trim so every piece can be physically cut without waste surprises.
1. What Fields Belong in a Shop-Ready Cut List?
Whether you are building kitchen cabinets from 4×8 ft plywood or framing a bench from 2×4 lumber, an actionable cut list captures six unambiguous attributes per component:
| Part Label | Length (X) | Width (Y) | Qty | Grain Lock | Edge Banding |
|---|---|---|---|---|---|
| Cabinet Side | 30-1/2" (775 mm) | 23-3/4" (603 mm) | 2 | Locked (No Rotate) | Front edge [R] |
| Bottom Deck | 28-1/2" (724 mm) | 23-3/4" (603 mm) | 1 | Locked (No Rotate) | Front edge [B] |
| Adjustable Shelf | 28-3/8" (721 mm) | 18-1/2" (470 mm) | 2 | Locked (No Rotate) | Front edge [B] |
| Drawer Box Side | 21" (533 mm) | 6-1/2" (165 mm) | 4 | Free (90° OK) | Top edge [T] |
2. How to Calculate a Cut List in 5 Steps
Follow this deterministic workflow before making your first rip on the table saw or track saw:
- 1
Subtract Joinery & Material Thickness from Overall Dimensions
Never measure panels by exterior box width alone. For a standard butt-joint or rabbeted carcass of outer width W and board thickness T, horizontal top/bottom decks measure W − 2T.
Inner Panel Span = Outer Width (W) − 2 × Board Thickness (T) - 2
Record True Usable Stock Dimensions & Edge Trim
Factory plywood edges often arrive dinged or slightly out of square. Subtract a perimeter Edge Trim Margin (for example 1/4" or 5–10 mm) from your 4×8 ft (96"×48") or 1220×2440 mm sheet before placing parts.
Usable Sheet = (Stock Length − 2 × Trim) × (Stock Width − 2 × Trim) - 3
Reserve Saw Blade Kerf Between Every Adjacent Cut
Every pass of a circular saw turns a strip of wood equal to blade thickness (kerf) into sawdust. Always add (N − 1) × Kerf when checking whether N parts fit across a board width.
- 4
Lock Grain Direction Before Rotating Parts
Oak, walnut, birch, and directional melamine veneers look mismatched if adjacent doors or cabinet sides rotate 90°. Lock rotation on visible panels while leaving hidden cleats and drawer boxes rotatable for higher yield.
- 5
Sequence Edge-to-Edge Guillotine Cuts & Log Reusable Offcuts
Order full-sheet rip and crosscuts so the longest straight cuts happen first, maximizing large rectangular remnants instead of scattering unusable triangular scraps.
3. How Saw Blade Kerf Works (And Why Four 12" Strips Don't Fit on 48")
Kerf is the width of material removed by the saw blade teeth on each pass. Ignoring kerf is the #1 reason DIYers end up 1/4" to 3/8" short on the final piece cut from a sheet.
At first glance, 4 × 12" = 48" seems to fit exactly across a standard 48" wide plywood sheet. However, separating 4 pieces requires 3 saw cuts. With a standard 1/8" (0.125" / 3.2 mm) table saw blade, those 3 cuts destroy 3 × 1/8" = 3/8" of wood—leaving the 4th strip at 11-5/8" instead of 12". Either account for kerf before buying sheets or reduce part width to 11-7/8" when four equal strips must come from one 48" width.
| Saw / Blade Type | Typical Kerf (Inches) | Typical Kerf (Metric) | Best Use Case |
|---|---|---|---|
| 10" Standard Table Saw Blade | 1/8" (0.125") | 3.2 mm | General cabinet plywood & 2×4 ripping |
| Thin-Kerf Circular / Table Saw | 3/32" (0.094") | 2.4 mm | Jobsite saws & reducing sheet waste |
| Track Saw (Plunge Saw) | 5/64" – 3/32" | 2.0 – 2.2 mm | Breaking down full 4×8 & 1220×2440 sheets |
| Industrial Sliding Panel Saw | 5/32" | 4.0 mm | High-volume melamine & scored panel cutting |
4. Why Workshop Saws Must Use Guillotine Cutting
Many generic 2D packing apps use free-form MaxRects or pinwheel nesting designed for laser cutters and CNC routers. On a table saw, track saw, or panel saw, the blade travels in a straight line from one edge of the sheet all the way to the opposite edge—this constraint is called Guillotine Cutting.
Every cut traverses edge-to-edge on table & track saws
Locked center T-junctions cannot be cut straight through
| Aspect | Guillotine (CutListFlow) | Non-Guillotine (CNC Nesting) |
|---|---|---|
| Cut geometry | Every cut runs strictly edge-to-edge across the active panel | Permits stopped interior L-turns and pinwheel clusters |
| Compatible shop tools | Table saw, track saw, sliding panel saw, circular saw | CNC router, laser cutter, waterjet only |
| Cut sequence clarity | Produces numbered Cut #1, #2, #3 rip & crosscut steps | Requires G-code toolpath; hard to execute manually |
| Offcut recoverability | Leaves clean rectangular shop remnants | Often traps narrow irregular voids |
5. Standard Plywood & Sheet Panel Sizes Reference
| Sheet Standard | Imperial Size | Metric Size | Common Applications |
|---|---|---|---|
| North American 4×8 ft | 48" × 96" | 1219 × 2438 mm | Standard cabinet plywood, sheathing, shop fixtures |
| Metric Full Sheet | 48-1/16" × 96-1/16" | 1220 × 2440 mm | Global cabinetry, birch plywood, melamine boards |
| Oversized MDF / Melamine | 49" × 97" | 1245 × 2464 mm | Allows edge trimming to clean 48"×96" net size |
| Baltic Birch 5×5 ft | 60" × 60" | 1525 × 1525 mm | Drawer boxes, shop jigs, CNC & furniture components |
| European Full Panel | 81-1/2" × 110-1/4" | 2070 × 2800 mm | Production frameless kitchens & commercial millwork |
6. Cut List & Kerf FAQ
- Should I enter nominal or actual dimensions in a cut list?
- Always enter actual cut dimensions. For example, a nominal 2×4 stud measures 1-1/2" × 3-1/2" (38 × 89 mm), and 3/4" plywood often measures 23/32" (~18 mm) thick.
- Why does CutListFlow calculate internally at 0.01 mm integer precision?
- Mixed tape-measure fractions like 24-3/8" and metric values like 619 mm cause floating-point drift in standard JavaScript floats. Exact integer units (1 mm = 100 units, 1 inch = 2540 units) guarantee zero rounding errors.
- How large should my Minimum Reusable Offcut setting be?
- Most cabinet shops keep remnants down to 4"–6" (100–150 mm) on both axes for drawer parts, cleats, and stretchers, and discard narrower strips.
- Which CutListFlow calculator should I start with?
- Use the Plywood Cut Calculator for 4×8 & 1220×2440 sheet goods, the Cabinet Cut List Calculator to split W×H×D boxes automatically, or the 1D Linear Calculator for lumber and extrusion.
Ready to Optimize Your Own Cut List?
Open any calculator below—unlimited parts, native 24-3/8" fractions & mm, zero sign-up required.