Cabinet Cut List Calculator with Instant Carcass Splitter
Enter overall cabinet width, height, depth, and board thickness above the workbench to split side panels, top and bottom decks, adjustable shelves, and inset back panels straight into the 2D guillotine sheet optimizer.
Supports full solid top decks (wall/tall cabinets) or twin 4" / 100 mm top stretchers (base cabinets)
Multi-Cabinet Runs
Use Cabinet Qty or + Append to combine different cabinet widths into one multi-sheet plywood cut plan
Edge Banding & Grain
Automatically tags front exposed edges for edge banding and locks vertical grain on carcass sides
From Box Dimensions to Cut Sheets in 3 Seconds
Skip manual spreadsheet math. Adjust W × H × D and panel thickness (e.g. 3/4" or 18 mm) and click Split & Load Parts.
Combine Multiple Cabinets with + Append
Building a 24", 30", and 36" cabinet run? Click + Append after each cabinet box to nest the entire kitchen onto minimum plywood sheets.
Automatic Edge Banding Totals
Every generated side, deck, and shelf carries pre-tagged front edge banding so you immediately know how many feet or meters of edge tape to buy.
Cabinet Cut List Calculator FAQ
How are cabinet top, bottom, and shelf widths calculated?
Inner cabinet panels subtract twice the carcass board thickness (W − 2T). Adjustable shelves subtract an extra 1/16" (2 mm) width clearance and 3/4" (20 mm) front/back setback.
Can I generate parts for base cabinets without a full top panel?
Yes. Switch the Top selector in the cabinet form from Solid Top to 2 Stretchers to generate a full bottom deck plus two 4" (100 mm) top nailer stretchers.
What if my back panel uses 1/4" (5 mm) plywood instead of 3/4" (18 mm)?
Uncheck Inset Back before splitting, or uncheck the back panel row in the Parts List when optimizing your 3/4" carcass sheets separately.
Can I combine multiple different cabinet sizes onto the same 4×8 sheets?
Yes. Click Split & Load Parts for your first cabinet, change the dimensions for the next box, and click + Append to add its panels to the active list.